Auto recycling study reveals myriad uses for 'end of life' vehicles - - Motor Age - Automotive training, certification & parts info

Auto recycling study reveals myriad uses for 'end of life' vehicles

Source: Motor Age

The world's airliners could fly nearly 100 million miles with the energy saved each year by reusing steel fenders instead of manufacturing them new, says a new study prepared for the United Recyclers Group (URG) by the University of Colorado (CU).

The study quantifies the benefits of automotive reuse and recycling by the nation's automotive recycling industry. The study specifically looks at reusing some common parts such as fenders and aluminum wheels, along with the reprocessing of motor oil extracted from 'end-of-life' (EOL) vehicles.

According to Michelle Alexander, URG executive director, "The CU study estimates that nearly 11 million vehicles are taken off the road in America each year when they reach their so called 'End of Life.' This process of attrition is caused by accidents and also occurs as vehicles age. There are tremendous quantifiable environmental and financial benefits for consumers that are provided by the green American automobile recycling industry as these vehicles are processed both for the reuse of certain parts (known as 'green parts') and recycling of most of the remainder."

A big question remains: What to do with 11 million EOL vehicles each year? Richard Filley, executive director of the not-for-profit GreenCARR Foundation (www.greencarr.org) says that "America's 6,000 plus auto recyclers know exactly what to do and they have been doing it proudly and profitably for over 100 years. With leadership from URG and the Automotive Recyclers Association (ARA), two not-for-profit trade organizations collectively representing over 2,000 of the nation's top automotive salvage companies, what could be a huge problem for this nation - dealing with a literal mountain of cars - is instead a huge asset to America's efforts to go green."

Alexander says, "Thanks to our auto recycling industry, the brakes are being tapped on climate change; energy consumption is being reduced; less material is being mined, refined and used; many forms of pollution are lowered; and the carbon footprint for the whole auto industry is being reduced."

The study was launched when Alexander contacted Dr. Angela Bielefeldt, PE, an award-winning professor of Civil & Environmental Engineering at the University of Colorado, Boulder. Bielefeldt's successes in incorporating service-learning projects into her senior level design capstone course, won her a prestigious 'Early Career Award' from the American Society for Engineering Education (ASEE). The study was completed by a team of senior environmental engineering students comprised of Patrick Gere (lead), Tyler Sale, and Madeline Tyson.

John Fischl, president of Riteway Auto Parts, in Phoenix, and a URG manager, says, "For a typical EOL vehicle, about 75 percent of the parts are salvaged for reuse, about 20 percent of the vehicle is recycled and the remaining 5 percent is thrown away." What that means, he adds, is that an "EOL vehicle is one of the greenest products on the planet. Through the reuse of 'green parts,' vehicles may partly live on for years and years, at great environmental benefit to Planet Earth and important financial benefit to the consumer driving a vehicle needing repair parts."

Some highlights of the study's major findings::

  • The recycling of steel fenders each year in the United States saves the mining of more than 5 million tons of iron ore, nearly 3 million tons of coal and more than 250,000 tons of limestone as compared to the manufacture of an equivalent number of new steel fenders;

  • The smelting of aluminum is very energy intensive, so it is no surprise that even more spectacular are the savings associated with the recycling of aluminum wheels. The study estimates that more than 1.71 billion kilowatt hours of energy are saved annually when the aluminum needed to make enough wheel sets isn't mined, isn't smelted and isn't manufactured. The energy savings from not having to manufacture aluminum wheels alone would be enough to power Chattanooga, Tenn., or Panama City, Fla., or the entire Big Island of Hawaii for an entire year. Another way to think about this is that the energy savings of the recycled aluminum are the equivalent of about 212 million gallons of gasoline, or more than 11 million barrels of crude oil. This would fill up six oil supertankers, and equal the entire U.S. output of oil (including offshore platforms) for a couple of days, or perhaps more importantly, keep America from needing to import oil from a place like Venezuela for 11 days.

End of Life vehicles are typically full of oil when they arrive at one of the automotive salvage facilities located across America for processing. The study estimates that more than 24 million gallons of oil are extracted from EOL vehicles each year in the United States, under the strict regulatory oversight of federal, state and local environmental agencies and offices.

Reprocessing motor oil is hugely beneficial to the environment, as compared to the process of exploring, drilling and refining new oil. More than 3.1 million tons of CO2 emissions are saved in the process, an amount that could offset the entire CO2 output of the United States for 45 hours this year.

For more information, visit www.a-r-a.org or call (888) 385-1005.

post a comment
Your email address will NOT be published.
appears with your comment
read our privacy policy
Note: does not support HTML
All comments submitted are subject to review and may be delayed before posting. We reserve the right to not publish comments.
SERVICE REPAIR NEWS
MOOG master chassis catalog includes more than 800 new parts
Snap-on to Sponsor Sprint Cup, Nationwide, IRL, NHRA teams
New University of the Aftermarket program offers executive education awards
Udell, Essential Action Design Group, donate speech proceeds to GAAS scholarships
Mitchell 1 DIY pairs up with online answer site JustAnswer
SHOP PRODUCTS
Tire stacks up as durable under any conditions
Mat stands up to your foot traffic
Tracer kit makes finding A/C leaks easier
New design keeps brake dust off wheels
New AVID TRZ comes in three sizes
Survey
Do you knowingly use technology from the race track in your shop?
Yes
No
Yes
78%
No
22%
View Results
Thanks for sharing information about your shop!
E-News envelope

Check the e-newsletter(s) you would like to receive.

Rollover each title for information.

Distribution - Anyone interested in auto parts issues will enhance their business by subscribing to our Distribution newsletter from Aftermarket Business. Published every Tuesday and Friday.
Collision Repair - Our Collision Repair newsletter from ABRN provides up-to-date news, innovative products, technical discussions and shop management features designed to enhance your business. Published every Tuesday and Friday.
Service Repair - Sign up today for Service Repair news from Motor Age. Benefiting auto technicians, this e-newsletter provides the latest news and analysis, technical automotive service information and business management tips. Published every Monday and Thursday.
Certified Technician - Professional automotive technicians and parts distributors seeking aftermarket products should sign up for the Certified Technician e-newsletter. This is your source for information about the latest tools, equipment and parts that can help you better service your customers. Published every Monday and Thursday.

Source: Motor Age,
Click here